Ana-Digit Ltd AD-RC Smoke Generator For RC Body ADRC Smoke+

Regular price $40.00

Shipping calculated at checkout.

PRODUCT INFORMATION:

  • AD-RCSmoke+ is an upgrade version.

    It supports:
    • Programmable brake mode to stop smoke when braking;
    • Simulate engine start smoke effect for sound module.
    • Throttle quick change between neutral and forward to generate smoke.

    Suitable for RC model vehicle / ship / tank / train
    Fully automatic calibration and remote operated via 1/2/3 channels
    4 selectable smoke generation rates for various usages
    2 wired LEDs for flame simulation and status indication
    5V~6V BEC and an external battery operated
    Selectable external battery voltage 7.2V or 12V
    The smoke chamber is in all-in-one construction
    Built-in overheat protection
    Environmental friendly smoke oil
    Plenty of smoke can last for 6 (max. smoke) to 15 minutes (min. smoke) with a refill
    Perfectly match with AD-RC03 to emit smoke using a 4-channel transmitter

    FUNCTIONS 

    • Channel 1, Steering (Optional)
      - 2nd priority to determine smoke on or off
        - Turn on / off smoke if CH3 sets to smoke following throttle and throttle is at neutral
    • Channel 2, Throttle (Compulsory)
      - Follow proportional throttle to emit smoke if CH3 sets to smoke following throttle
    • Channel 3 (Optional)
      - Highest priority to determine smoke on, off and following throttle
    • Smoke Generation Rate
      - 4 rates are selectable by 2 on-board jumpers
    • Flame Simulation
      - 2 flame simulation patterns i.e. follow throttle and random, are selectable by an on-board jumper
    • Status Indication
      - Show operating status via 2 wired LEDs
    • Overheat Protection
      - Automatically stop the heater if overheat occurs.  Then resume to normal after 1 min
    • Smoke Outlet
      - 2 silicon tubes can be used to guide the smoke path

    Package Include:

    • Main unit
    • Smoke Chamber
    • Servo Cable
    • 7mm Outlet Cap x 2
    • 7mm Silicon tube x 2
    • LED Wire Assembly (1 Wire with 2 LED)
    • User Manual

    Dimensions:

    • Smoke Unit: length 38.5mm width 30mm height 41mm
    • Control Unit: length 65mm width 30mm Height 11mm
  • This item replaced these previous versions:
    AD/AD-SMOKE
  • Product total weight: 200.00 grams
  • Factory description: Ana-Digit Ltd AD-RC Smoke Generator For RC Body ADRCSmoke+
  • Manufactured by Ana-Digit Ltd
  • Manufacturer number: AD/AD-SMOKE+