6.5mm suspension lift kit for the RC4WD HERO. This will allow you to fit bigger tires under your rig and gain ground clearance without messing up suspension geometry and still keep that chassis weight down low. You can choose a from a variety of colors, but default is black.
KIT PARTS: Hardware 8 –2x12mm 4 –3x24mm Printed Parts 2 –Front Shock Spacers 2 –Rear Spacer Blocks 2 –Upper Spring Mount Long 2 –Upper Spring Mount Short
Printed instructions for installation
You can combine with with the 9mm body lift for a total 15.5mm if lift (similar to a 1:1 6inch lift). You can fit a 4.19 tire with mild bumper trimming with both lifts installed.
This lift will work with our inner fender kit and the reservoir relocation kit.
NOTE: This item is 3D printed. Due to the nature of 3D FDM printing this item may contain tiny visual blemishes and may require some trimming and detail painting for optimal visual appeal/fit. Similar to what you would expect to do with model parts. These blemishes in no way affect the functionality of the part.
