Designed to fit the Ascender Bronco body. May fit other with modification. These are normally printed in black. Can be painted to suit your needs.
There are 2 versions of this kit.
Stock it includes everything to mount to a stock Vaterra with trans still in center. The seats will mount to the floor boards and you will have to design a cover for the trans. Most builders use a piece of fabric to act as carpet.
Bench Kit is used if you have a forward motor mount and transfer case installed and come with a bench seat instead of bucket seats for the front. You will still need to glue a piece of cloth in for the floor to cover electronics and such.
You gets all 4 fenders, the floor boards, the dash, the front seats and seat mounts, the rear seat, both Incognito Velcro mounts, and all the brackets. You will have to supply your own screws. This kit will need painted to complete and detailing. You may need to use cloth or styrene to full finish the floor off. You will not get the rear floor, that must be fabbed yourself from a piece of styrene
Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts.
IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.
Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.
Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.
