HPI Venture Head and Tail Light Set

Since the RTR has stickers where the lights go, I used a pure acetone based nail polish remover and some q-tips to take the paint off behind the sticker in order to allow the light to shine through.

For the headlights, the body was somehow cracked in the headlight in shipping so I removed the light area with a dremel sanding disk and cut some lexan circles and glued them in place before I put the buckets in. All in all, I think It looks pretty good.

Fix the light buckets in place with some hot glue and your are good to go! All you need is, 2x 5mm white LED, 2x Red 5mm LED, 4x 3mm yellow LED and 2x 3mm white LED a light controller and you are golden!

Check out the Video:

Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts.

IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.