Mini-B Weight Tuning Set

Mini-B Weight Tuning Set: The weight tuning set allows you to adjust or add weight with 1 mm thick brass plates. (SEE CHART FOR BREAK DOWN)

The front plate mounts under the servo and will raise your servo 1mm. There are three mounting holes in the plate +6mm and +8mm. These or for people who have drilled the chassis to move the servo forward to use it without the servo saver. You can also use them as a template to make your drill point for moving the servo. The plate is initially mounted under the battery posts. The plate has been slotted to allow youto slide the plate under without completely removing the screws.

The E-Palate can be used to mount your electronics for easy removal and cleaning. The E-plate also has an insert plate under the battery to adjust bias. There is included one large under battery plate to further adjust the mass of the car.

The Rear Weight Plate is mounted under the waterfall mount posts. The plate has been slotted to allow you to slide the plate under without completely removing the screws. If you need additional rear weight, you can add up to 14 grams of sticky wheel balancing weight on the brass plate under the transmission cavity.