050 F.I.S.H. Build for Stainless 24

050 F.I.S.H. Build for Stainless 24

The 050 F.I.S.H. uses a series of compact components that clean up the electronics on the Stainless 24 for a nice, sleek, compact yet accessible design! We used the SCX30 2S battery or the Redcat Apex18 3S battery.

We built our 050 F.I.S.H. with a stock SCX24 Lexus as the donor. We added 050 F.I.S.H. components listed below: 1.3 wheels, HPI min-Rover 1.3 tires, STRC Steering link, and an SCX10 C10 Front Drive shaft to make this thing crawl! 

We built the 050 F.I.S.H. with:

F - FlySky Micro Receiver - GMRC3
I - Injora MBL32-NANO ESC
S - Slim Parts Set by Spare-Time Hobbies
H - Holmes Hobbies Revolver 050 2200kv 12-pole, 9-Slot Brushless Motor.

What you get:

• 2x Slim Door Panels (Driver's Side Fits the FlySky Micro Receiver - GMRC3)
• 1x Nose Plate w/integrated Battery Holder
• 1x Roof w/integrated Injora NANO Mount Position
• 1x Rear Arched Chassis Brace
• 2x Bearing Carrier w/adjusted anti-squat positions

What you need:

An Authentic Stainless 24 Chassis kit - https://rcaddict.com/products/the-stainless-24-kit?_pos=3&_sid=bf0c71941&_ss=r

SCX24 Doner and all Running gear/electronics.

Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts.

IMPORTANT: Do not use power drivers on 3D printed parts. Over-tightening printed parts can cause premature cracking and crushing. Always ensure your hardware will not bottom out in the screw pocket. This can also cause a 3D printed part to break prematurely.

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advanced slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.