Axial Gladiator 13.9 (353mm) wheelbase High Clearance Rear - Brass Kit

Axial Gladiator 13.9 (353mm) wheelbase High Clearance Rear  - Brass Kit

Designed for Axial Gladiator 13.9 (353mm) wheelbase 

This kit works with the original SCX10 III Gladiator and the new Gladiator v2.

The brass upper and lower combo kit gives you the best balance for your rig.  The weight provides down-low weight on the axles.  The high-clearance rear offers a good flat area off the skid for a better breakover angle for better crawling.

Details:

Delrin (1/4") is the lightest and slides the best over rocks, logs, and other trail debris.

Chubbies (5/16") is the big daddy for weight.  It's made of brass rod and is very stout.  This is great for that massive down-low weight that crawlers often need to stay planted to the ground.

High Clearance Option:
The high clearance option gives you a bend on the rear lower links to help clear obstacles.  You may find on certain vehicles this will leave your driveshaft more exposed to damage.  Some folks will put spacers between the link and rod end to clock the driveshaft upwards out of the way. 

High Clearance Option:
The high clearance option gives you a bend on the rear lower links to help clear obstacles.  You may find on certain vehicles this will leave your driveshaft more exposed to damage.  Some folks will put spacers between the link and rod end to clock the driveshaft upwards out of the way. 

Rod Ends:

D-Links uses the Traxxas Revo rod ends with our product. They have proven to be reliable and long-lasting.  We do sell replacement rod ends in case you wear yours out. 

Steering:
Steering tie rod and drag links are available for an extra charge, but due to so many different options for knuckles and steering, you must include your desired link length, measured eye to eye or screw hole to screw hole. We can not be held responsible for incorrect fitment, but we will work with you to get the correct fitment should there be an issue.

Warranty Info:
D-Links are made in the U.S.A.  All D-Links are lifetime guaranteed.  Send in the broken link and receive a brand new one.  We can not guarantee the rod ends, as they are a wear item and vary between brands.

FAQ:
Q: Why don't we do aluminum?
A: Aluminum tends to grab at rocks and stick to them. It also bends fairly easily; for this reason, we don't do aluminum links. If you are wanting light, Delrin will slide better and hold up better than aluminum and is super light. 

Q: Why not stainless? Doesn't it weigh the same as brass?
A: Stainless and brass are similar in weight; however, we found that brass seems to slide better over obstacles.

https://rcaddictparts.com/products/d-links-links-selector-for-all-vehicles

*Note* D-Links are made to order and could take up to 3 weeks to be completed.  Turnaround is usually faster, but please allow some time for quality.