Axial SCX10 Pro: Sliders for Power Wagon Body

The SCX10 Pro - Tub Sliders for Power Wagon Body is designed to bolt in place of the stock sliders. You can use the short body posts on the rear of the cab to hold it in place. You will use the stock front body mounts for the hood area (we are developing a NO PIN option for the hood). You will need 4 - M2x6 Screws to hold the battery strap plate on. (There should be a few left in your kit unless I had the incorrect amount).

Note: For the upper link screws, use the M3 - 18 screws from the kit.

Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts.

IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.