Axial SCX10iii: Rear Sway Bar Mount (JLU Wrangler, Base Camp)

FITS: 

JLU Wrangler, Base Camp

HARDWARE REQUIRED: 

4 - M3x14 (attach mount to the truck)
2 - M3x35 (attach the sway bar ends to the lower link mounts)

MODIFICATIONS NEEDED: 

None

DESCRIPTION: 

Can I "Sway" you to head over to Reefs RC and pick up a sway bar for your SCX-10 III 

Fits Axial: JLU Wrangler, Base Camp

Other kits may work as long as the bar diameter is not greater than 2.5mm. The center hole is printed at 2.6mm to allow the bar to pass easily through without slop.

Needed Sway Bar Kit: https://rcaddictparts.com/products/reefs-rc-sway-bar-kit

---

Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts.

---

    IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Ensure your hardware will not bottom out in the screw pocket, this can cause 3D printed part to break prematurely.

    Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

E-mail: Sales@spare-timehobbies.com | Facebook: Spare-Time Hobbies