Axial SCX10iii SR5 - High Clearance Brass Steering Link Kit

Axial SCX10 III SR5 –  High Clearance Brass Steering Link Kit

Upgrade your SR5 with the High Clearance Brass Steering Link Kit—a performance-focused mod designed to improve both strength and handling. Made from solid 6mm brass rod, this kit adds valuable forward weight bias to help keep your front end planted on technical climbs.

The high-clearance design gives just enough room to clear the diff pumpkin, providing a bit more steering angle and better terrain control. Plus, it significantly boosts rigidity compared to the stock plastic tie-rod, giving you more precise and durable steering response on the trail.

Includes:

1x Brass HC Link
1x Brass Rear Drag Link
4x Rod Ends w/Balls
4x M4 Studs

Key Features:

• Made from 6mm solid brass rod for strength and weight

• Improves COG

• Increases rigidity over stock plastic components

• Made in the USA

• Backed by a Lifetime Manufacturer Guarantee

*Note* D-Links are made to order and could take up to 3 weeks to be completed.  Turn Around is usually faster, but please allow some time for quality.

Axial SCX10iii SR5 - Brass Link Kit

3 x Brass Uppers
4 x Brass Lowers
16 x Rod En

This is specifically for Axial SCX10iii 12.3" (313mm) Wheelbase with panhard setup.

If you need custom or something different please go here: https://rcaddictparts.com/products/d-links-links-selector-for-all-vehicles

Brass (1/4") is the heavy weight, typically used as lower links for good vehicle balance.  It typically slides better then aluminum.

High Clearance Option:
The high clearance option gives you a bend on the links to help clear obstacles.  You may find on certain vehicles this will leave your drive shaft more exposed to damage.  Some folks will put spacers between the link and rod end to achieve to clock the driveshaft upwards out of the way. 

Rod Ends:

D-links uses the Traxxas revo rod ends with our product. They have proven to be reliable and long lasting.  We do sell replacement rod ends in case you wear yours out. 

Warranty Info:
D-Links are made in the U.S.A.  All D-Links are lifetime guaranteed.  Send in the broken link and receive a brand new one.  We can not guarantee the rod ends as they are a wear item and very between brands.

FAQ:
Q:Why don't we do aluminum?
A: Aluminum tends to grab at rocks and stick to them. It also bends fairly easily, for this reason we don't do aluminum links. If you are wanting light, Delrin will slide better and hold up better then aluminum and is super light. 

Q: Why not stainless, doesn't it weigh the same as brass?
A: Stainless and brass are similar in weight, however we found that brass seems to slide better over obstacles.

https://rcaddictparts.com/products/d-links-links-selector-for-all-vehicles

*Note* D-Links are made to order and could take up to 3 weeks to be completed.  Turn Around is usually faster, but please allow some time for quality.