Skip to product information
1 of 3

Bed Side Tube Rail Univeral

Bed Side Tube Rail Univeral

SKU:STH-0221

Regular price $8.00 USD
Regular price $9.95 USD Sale price $8.00 USD
Sale Sold out
Shipping calculated at checkout.

Confirmed Fitment on the following Bodies
Redcat Ascent RTR Bodies Blue, Red, Clear Pinched or Clear Regular.
J-Concepts Power Master (0469)
Axial Base Camp (AXI230046)

Hardware Needed: 10 - M2.5 x 6 Screws

Modifications Required: Drill holes in the bed with a 2.6mm (5/64th) Bit

Dimensions:
The Base Plate is 152.4mm (6in) Long and 6.5mm (1/4th in) Wide

Note: The base plate can be used inside the body or outside the body depending on what look you are going for.

These bed rails are attached with 10 - M2.5 x 6 Screws. You will need to drill holes in the top of the bed side to mount it. Tape the top plate in positon and use it as a template to determine where you will drill your holes. Mark each positon with a marker or use a bit smaller than the hole in the top plate to drill a pilot hole. You may damage the top plate.


Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts.


IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.

View full details