Element Enduro: Axle Stiffener Truss (Rear)

The Element Axle Stiffener Truss (Rear) is design to add extra support to the axle tubes with its 4 point mount. We made these in 2.5mm stainless to add a little centerline weight(15.5 grams) on the axle. This will work on the stock axles with the stock configuration and CMS. The mount will help prevent your axle from snapping where the tube attaches to the differential.

Fits the Element Enduro series trucks.

Note: Can only be used in the front with a custom bent Pan-Hard Link

You will receive: 1 - 2.5mm Stainless Bracket, 2 - M3 Lock Nuts, 2 - M3x14, 2 - M2.5x20, 1 - Spacer

Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts.

IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.