Element Enduro: HC Skid V1

The Element Enduro High Clearance skid is a direct swap for you stock skid to gain an extra 4-5mm of ground clearance. You will need to space the front battery tray up away from the chassis brace to allow for drive shaft clearance. This configuration is designated for the 4 link setup. The stock trailing arm bracket will still function with either a 3mm spacer between the pivot ball and the Bracket. A longer screw will be needed to attach the trailing arm.

You will receive: 1x HC Skid, 4 - M3 Nylock, 4 - M3x35, 4 - M3x16

Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts.

IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.