Lightweight Low Profile Comp Roof Rack with Winch Point

Lightweight Low Profile Comp Roof Rack w/Winch Point

The LW LP Roof rack meets or exceeds the specification for a "roof rack" on the SORRCA 2025 Rule Book. 

What you Get:

• 1x Roof Rack (Raw 6061 Aluminum)
• 4x m3x12
• 4x m3 Nylock
• 1x m3x8
• 4x Spacer
• 1x Winch Point Guide

Installation Notes:

• Place the roof rack on your truck where you would like to mount it.
  
• Mark the holes with a marker.
  
• Drill your mount holes with a 1/8th in Drill Bit
• Attach your roof rack to the roof with the 4x m3x12, 4 Nylock and 4 spacers
• If you desire to use the winch point. Install it on the middle part of the rack with the tapered edge facing down with the m3x8

Due to the nature of 3D printing, items may contain tiny visual blemishes. Items may require some trimming and painting for optimal visual appeal/fit; similar to what you would expect to do with model parts.

IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.