This is a light weight 3d printed figure that is position-able. The bend at the shoulders, elbows, hips, and knees, and the head can swivels. You can even order it with your own head for a setup fee.
Basic figure, choose from different head options.
Comes printed in white PLA+. You detail how you want.
7" Version:
7" version fits perfectly in the Spare Time Hobbies light weight seats.
The weight on 7 inch figure is about 54 grams
Sitting height is 101mm or approx 4 inches
6" Version:
Weight on the 6" is approx 44 grams
Sitting height is approx 91mm or approx 3.6"
5.5" version:
5.5" inch version for those who want the minimum for the SORRCA rules.
5.5" version fits a wraith seat.
Weight on the 5.5 inch version weighs approx 34 grams.
Sitting height is approx 85mm or approx 3.3 inches
Custom:
If you want your own face or a custom face, you will need to upload minimum 4 pictures 1 of each side or your head.
Custom sizes upon request.
Use 7 inch for axial jeep, Vaterra blazer and bronco
Use 6 inch for china JK, hero, pro-line blazer
Use 5.5 for Vaterra k10 and tf2
All sizes and weights are approximate due to variations in the different styles and prints.
**made to order and could take up to 3 weeks to complete**
** Please consider gluing your figure in place with shoo goo or e6000. The joints can be loose and a little dab of glue on the ball joints will help the appendages stay on.**
Assembly video: https://youtu.be/B6O4N5_bO5Q
NOTE: This item is 3D printed. Due to the nature of 3D FDM printing this item may contain tiny visual blemishes and may require some trimming and detail painting for optimal visual appeal/fit. Similar to what you would expect to do with model parts. These blemishes in no way affect the functionality of the part. 3D printed items are susceptible to heat and may warp if left in direct sunlight. This can easily be corrected with a hair dryer or light heat gun use. Care should be taken to not leave in hot cars or direct sunlight. A coat of paint will help with this.
