Losi Mini-T 2.0 & Mini-B: Motor Plates

Improved Motor Plate allowing easier mesh adjustments for your pinions. I have also added an additional hole 1mm higher to secure the waterfall mount if you are using my Brass weight tuning set.

The BIG BLOCK motor plate has been designed to accommodate more common motors like 24mm can 380 motors. 24mm can motors will give you a similar range of of pinion adjustments as stock.

You can fit a 29mm motor in with 1 pinion option with the waterfall on. 

Spur swap: You can use a Mini-8 48p Spur (58 & 60) for other gearing options with a 24mm motor. You will need both the Mini-8 Slipper pads and Spur set.

Losi212009 Spur Gear Set 48P: Mini 8IGHT-DB

LOSB1925 Mini 8IGHT Slipper Pad Set

With the 10 Shock 5150kV motor at 29mm in diameter you can use either Stock Spur 60/18 Pinion, Mini-8 48p Spur 58/15 or 16 or 60/12 for gearing options. Different brand pinions may be a slight different diameter and may need to go up/down one tooth. The 10 Shock motor will not adjust in the mount due to its size. Without the water fall, you gain some adjustability.

The LTX motor plate has been designed to accommodate motors from the 1/18 Latrax Rally/Teton Cars. The Latrax Motors have a 17mm Bolt patern and use an M3 Screw.

Spur swap: You can use a Mini-8 48p Spur (58 & 60) for other gearing options with a 24mm motor. You will need both the Mini-8 Slipper pads and Spur set.

Losi212009 Spur Gear Set 48P: Mini 8IGHT-DB

LOSB1925 Mini 8IGHT Slipper Pad Set

The Super Charged motor plate has been designed to accommodate 540 and 550 motors. The intent is for use in your custom drag racing application like in the Hack Fab drag chassis.

Parts are Cut from 6061 Aluminum

---

Pay-Pal - CONFIRM YOUR VERIFIED SHIPPING ADDRESS

Spare-Time Hobbies will ship to your CONFIRMED Pay-Pal address only if paying through Pay-Pal. Please confirm your shipping shipping address is correct prior to making payment. If your package is shipped to the wrong address because you failed to confirm your address, I will do everything in my power to initiate a package intercept, divert or return to sender. These services are provided by USPS prior to delivery at a cost. The buyer will pay all associated costs with the intercept, divert or return to sender along with reshaping costs involved. If you choose to return an item successfully intercepted or returned, you will receive a full refund less the cost of the package intercept service.

Lost Packages
All lost package resolutions will be handled though USPS. I will assist by any means necessary along with replacing the lost item at a reduced or no cost depending the availability. Uninsured packages will not be replaced.

---

IMPORTANT: Do not use power drivers on 3D printed parts. Over tightening printed parts and cause premature cracking and crushing. Always ensure you hardware will not bottom out in the screw pocket. This can also cause at 3D printed part to break prematurely.

Printed Parts - These parts will be printed in Black (Unless otherwise requested) using advances slicing methods for maximum strength. All 3D printed parts come with a lifetime replacement guarantee. If you break a part, simply send us a photo and your order number. The photo is simply to evaluate for common issues and help identify potential improvements to existing designs.

Contact us @ Sales@spare-timehobbies.com or PM us @ Spare-Time Hobbies on Face Book.